What Is Post-Construction Cleaning?
After any construction or renovation project, the space is left with layers of fine dust, debris, and residue that regular cleaning cannot adequately address. Drywall dust settles inside cabinets, on light fixtures, and in ventilation systems. Paint overspray appears on windows and hardware. Adhesive residue sticks to glass and appliance surfaces. Sawdust collects in floor crevices and corners.
Post-construction cleaning is a multi-phase process designed to address this. We work systematically from top to bottom, from surface dust removal to detailed cleaning, until the space is genuinely ready to furnish and live in. This is a cleaning service — large construction debris and leftover building materials should be removed by your contractor before we begin.
Whether you have built a new home, renovated a kitchen, finished a basement, or added a bathroom, we handle the cleanup across Hamilton, Stoney Creek, Ancaster, Dundas, Waterdown, Burlington, Grimsby, and Oakville.
Common Types of Construction Debris We Handle
Drywall and Plaster Dust
Extremely fine particles that settle on every surface in the home and recirculate through HVAC systems if not properly removed.
Sawdust and Wood Shavings
Accumulates in floor crevices, corners, and behind fixtures during framing, trim work, and cabinetry installation.
Paint and Caulk Residue
Fresh overspray on windows, drips on floors, and caulk smears on fixtures. Cured or specialty paint may require assessment before removal to avoid surface damage.
Adhesive and Sticker Residue
Labels on windows, appliances, and fixtures. Tile adhesive on grout. Tape residue on trim and glass. Removal depends on the surface material and adhesive type.
Concrete and Grout Dust
Heavy dust from foundation work, tiling, or countertop installation that requires thorough scrubbing.
General Construction Debris
Small screws, wire clippings, insulation fibers, packaging materials, and miscellaneous debris left behind by trades. Large debris and heavy materials should be removed by your contractor before cleaning begins.
What Is Included
Our post-construction cleaning addresses every area affected by construction work.
Dust Removal
- Fine construction dust removed from all surfaces
- Walls and ceilings dusted or wiped
- Light fixtures, ceiling fans, and recessed lights cleaned
- Air vents, returns, and ductwork openings vacuumed
- Window sills, frames, and tracks cleaned
- Cabinet interiors and shelving wiped
- Closet interiors dusted
Surface Cleaning
- Fresh paint overspray removed from fixtures and glass (subject to assessment — cured or specialty paint may require additional treatment)
- Adhesive residue and sticker removal where surface and material allow
- Countertops, vanities, and built-in surfaces sanitized
- Door frames, baseboards, and trim wiped
- Switches, outlets, and hardware cleaned
- All tile and grout surfaces scrubbed
Floors
- Hard floors swept, mopped, and scrubbed
- Tile grout cleaned of construction residue
- Carpeted areas vacuumed thoroughly (multiple passes)
- Floor edges and corners detailed
- Stairways swept and mopped
Windows and Glass
- Interior window glass cleaned
- Glass doors, shower enclosures, and mirrors polished
- Window tracks and hardware cleaned
- Smudges and fingerprints removed from all glass surfaces
Our Multi-Phase Process
Post-construction cleaning is done in stages to ensure thorough results.
Site Assessment
We visit the property or review photos to understand the scope — what was built or renovated, what materials were used, and the current condition.
Rough Clean
The first pass focuses on removing surface dust accumulation, sweeping small debris, and clearing surfaces so detailed cleaning can begin. Large debris should be removed by the contractor beforehand.
Detailed Clean
Every surface, fixture, window, and corner is cleaned methodically. This is the most time-intensive phase and brings the space to a liveable standard.
Final Walkthrough
We inspect every room and address anything that needs a second pass. The space is left move-in ready.
When to Schedule
The best time to book a post-construction clean is after your contractor has finished all work — including final paint touch-ups, fixture installation, and any building inspections — but before you begin moving furniture or belongings into the space.
Cleaning an empty space is significantly more effective because every surface is accessible. If you are working with a builder or general contractor, ask them to confirm when the space will be ready for cleaning and let us know so we can schedule accordingly.
Frequently Asked Questions
Areas We Serve
Post-renovation and new-build cleanup is available for projects throughout the region, including:
Ready to Get Started?
Request a free, no-obligation quote and we will get back to you promptly.